You are viewing images from 02/04/12 in the main gallery. This set contains 20 pictures.
Time to make a rocket.. out of that.
Instructions ready
Neil tried to remember what he learned about rockets.. which isn't much
The firing device
Buzz is ridiculous
Why is he sitting like this??
First step.. glue these parts together
Glued!
Prepping the nosecone for painting
Time for a little nighttime spray painting
In the meantime, I've glued the base into the cardboard tube and am letting it dry
Painting the fins. If I were doing this properly I would've used a primer first so it didn't look like crap.
This is how I painted the nosecone without getting (much) paint on the porch
Paint!
A lot of paint just went flying away on the wind
Holding the two halfs together
In the morning, this is what the nose cone and fins looked like. Not great, but not bad!
If you look carefully you can see where the paint missed the cardboard.. oops.
The fins are now in place!
Looks like a rocket to me!
You are viewing images from 02/04/12 in the main gallery. This set contains 20 pictures.
This page was handcrafted in 0.01476 seconds just for you.